Table Type Heavy Load Scaffolding System is a highly endurable carrier system whose main carrier is consisting of H frames. The main carrier frames are made of 60 x 3 mm steel pipes and Diagonal components are made of 34 x 2 mm pipes.

PortiTable laying formwork system facilitates 3 different applications with its less and easy-to-install components.

*Table Formwork
*Formwork scaffolding
* Ladder tower

The system consists of upper ad lower parts when used as Table Type Laying Below-Beam Scaffolding. The upper part consists of Plywood, an Auxiliary Carrier (Grid), a Main Carrier (Ridge) and a Four-Way Head. Plywood is connected to the auxiliary carriers by means of screws. The auxiliary carriers are fixed on the main carriers by holey wooden connection components. Four-Way Heads (jacked or piped) are fixed on main carrier girders by connection components and the upper part is formed.

The lower part has Frames, Diagonals and the lower adjusting shafts. The lower adjusting shafts are connected to the frames by Jack Clips. The lower part is formed by inserting Diagonals into locked pins over the frames as well. The Table Type Scaffolding is completed by interconnecting the upper and lower parts by means of Pins and Wedges.

                        

When used as table type, the installation duration of formwork is minimized since the formwork is removed without detaching from panels by means of a formwork vehicle or a crane.