Along with being utilized as “working scaffold” in general, the system is a universal tower system which can be used as both “stair tower” and “formwork tower” as well. There are flanges intermittently from 50 to 100 cm, preferably, on vertical pipes, whereas there are heads, named as “dovetail”, at the ends of horizontal and cross pipes. All the pipes used in the system have passed through mechanical tests. This system, which is designed in such a way that even one person can do the installation, is assembled and disassembled very quickly. The dovetails are fastened to the flanges by means of just a hammer and tightened with wedges. Thanks to the 8 different connection points on the flanges welded to the vertical elements, it has the ability to be applied to all types of architectures. Fixed parts are protected against corrosion by hot dip galvanization. All of the system complies with TS-EN-12810-12811 standards. It provides a safe working environment at the highest level. It occupies very small area volumetrically during storage.